15.2 Liter Chamber, 6.8 kg Light Weight to carry.

The incubator is ideal for the experiments of the cultivation of animal cells, sperm/ovum, anaerobic cells, all sorts of microbe cells, hatching/germinating and special tissues.
Features:
- Fast Heat-Up, Fast-Recovery, Stable Control
- 6 Sides Direct Heating System
- Electric heating wire is covered on all sides of the chamber which makes stable uniformity and provides fast heat-up & temperature recovery. 3 parts of heating section are controlled and calibrated individually by 3 temperature sensors.
- Dry Wall and Air Jacket - Warm air from heating wire is preserved in space between the chamber and the insulation layer. It helps temperature recover faster and minimize heat loss.
- DUAL BEAM IR CO2 Sensor - Fast & precise detection for CO2 gas regardless of temperature and humidity.
- Natural Humidification Using Water Tray
- Alarm System
- Gentle Air and Moisture Convection
- Easy to clean - Rounded corner allows easy cleaning.
- The entire chamber is made of stainless steel(SUS304)
- Over Heating Limit
- Perforated Shelves - good for natural air flows.
- No Condensation
- Microprocessor PID Control

Options:
- UV sterilization - 4W UV is placed on the chamber ceiling and beside the circulation fan. The UV light cannot reach sample and sterilization is operated during culturing.
- Dry hot air sterilization - Maximum 125℃. No need to remove IR CO2 sensor
- Decontamination by HEPA filtration of the chamber
- 25mm Access Port at the left side.
- Monitoring System - Analog connection port has been designed to observe the status of equipments in real time even in the far distance.

This series of CO2 incubators combines heating and peltier cooling systems, a perfect development from environmentally friendly and energy efficient heating and cooling technologies that facilitate excellent control accuracy and minimal fluctuations.
Including all the features of the standard version.

Copper plate inner chanler with better contamination effect, including all the features of the standard stainless steel version.

In addition to all the functions of the WCI-180, the CO2 shaking incubator has the following features:
* 180-litre CO2 incubator with shaker installed inside
* Low noise by using a low vibration DC brushless motor
* CO2, humidity and temperature have good uniformity in the chamber
* The shaker can be removed for static cell culture
* The standard universal plate, optional sticky plate
* A variety of plate types (Erlenmeyer flasks: 100mL, 250mL, 500mL, 1000mL, test tube clamps, 96-well plates)
* The external controller can control the internal rollers individually
* The speed, temperature and CO2 value are displayed and controlled on the LED screen

All operations and controls are on the external control panel. In addition to all the functions of the WCI-180, the CO2 incubator
with roller apparatus has the following features:
* 180-litre CO2 with roller apparatus installed inside
* Low noise by using a low vibration DC brushless motor
* CO2, humidity and temperature have good uniformity in the chamber
* The roller apparatus can be easily removed for static cell culture
* The external controller can control the internal rollers individually, and the speed displays on the TFT screen
* The temperature and CO2 value are displayed and controlled on the LED screen

These shaking CO2 incubators are ideal for use in the fields of biosimilar production, proteomics, crystallography, genomics, cell biology and new drug development. A large capacity CO2 incubator with separable long life shakers provides the optimum solution for cell suspension culture. The internal chamber is subdivided into 3 compartments each holding a separable orbital shaker which can hold Erlenmeyer, cylindrical flasks or deep well blocks. The dual beam Infrared sensor provides precise CO2 control while the six side heating system ensures excellent temperature control and recovery and also humidity. An outstanding air circulation system ensures temperature uniformity within all compartments. The unique patented orbital shakers are constructed with stainless steel to minimize contamination and cleaning. Well sealed plate type BLDC motor allows these shakers to be used in highly humid environment and operate without noise, vibration or particulate generation. These powerful shakers can be used for many years with reliability guaranteed.

Features:
Cell suspension culture - The CO2 shaking incubator is designed for the suspension culture of eukaryotic cells such as CHO, HEK, Hela etc. but can also be used as a static incubator if required.
Infrared sensor - Industry standard dual beam infrared sensor is used to maintain control of CO2 density Pullout shaker platform The platform of each shakers can be pulled out for loading flasks on each shakers efficiently.
Sticky mat & various holders - The orbital shakers can be used with sticky mats or dedicated flask holder trays or universal flask/tube holder plates.
Individual shaker control - Each orbital shaker can be individually controlled by an external control panel.
Excellent temperature control - All 6 sides are directly heated and combined with PID control to ensure that temperatures are reached quickly and uniformity is maintained. Further the system combines forced air and natural convection to maintain the best temperature uniformity at all times.
High and natural humidification - A deep and wide humidity tray allows high and natural humidity to be generated.
Split inner glass doors - The internal chamber is separated into three compartments,each with its own shelf, shaker and glass door. This design prevents excessive loss of heat and CO2 when removing flasks etc.
Humidity display - LED display of actual humidity in the chambers informs the user of time to supplement the water in the humidity tray
Auto restart function - Each shaker has an autostart function so that if the glass inner door to each compartment is opened the shaker in that compartment stops and starts again when the door is closed.Auto start is also enabled if there is a power cut.
UV lamp - A UV lamp sited next to the circulation fan works to sterilize the air in the incubator even during cell culturing. The UV lamp can be turned on or off by a switch on the front panel.
Stain resistant interior - The inner chamber and all orbital shakers are constructed with stainless steel SUS304 which is designed for use in GMP facility and is resistant to rust formation under high humidity conditions
Anti-bacterial filter - A HEPA filter, located in post circulation fan, traps microbes and helps to maintain a sterile environment.
Removable shelves - Larger growth vessels like 5 or 10 liter flasks can be accommodated by completely removing the shelves

The Tri-Gas incubator is ideal for the experiments of the cultivation of animal cells, sperm/ovum, anaerobic cells, all sorts of microbe cells, hatching/germinating and special tissues.
Features:
- Fast heat-up, fast-recovery, reliable control
- 6 Sides Direct Heating System
- 3 parts of heating section are controlled and calibrated individually by 3 individual temperature sensors.
- Dry Wall and Air Jacket Warm air from heating wire is preserved in space between the chamber and the insulation layer. It helps temperature recover faster and minimize heat loss.
- Drywall withinsulation requires no regular maintenance.
- DUAL BEAM IR CO2 Sensor
- Fast & precise detection for CO2 gas regardless of temperature and humidity.
- Natural Humidification using Water Tray
- No Condensation
- Microprocessor PID Control
- Decontamination (Optional).
- HEPA filtration

Options
- Access port - 25mm Access Port is available at left side. (Upon ordering and additional charge)
- UV sterilization - 4W UV is placed on the chamber ceiling and beside the circulation fan. The UV light cannot reach the sample and sterilization is operated during culturing.
- Peltier cooling system With Peltier cooling system in WCI-40T & WCI-180T, It can work below room temperature.
- Copper chamber WIGGENS customize chamber with copper plate chamber for enhanced contamination protection.
- O2 Control
- Hot air sterilization
- Monitoring System
- Analog connection port has been designed to observe the status of equipments in real time even in the far distance.

Remote shaker for CO2 Incubator. This is Compact Size Shaker with benefits such as small foot print, easy to move. Built-in Plate Type BLOC motor provides low noise, low vibration. Despite compact size, shaking is powerful and work place is large to load various vessels.
Extremely Low Heat Release from Shaker, Moisture Resistant Structure, Wire Remote Control Box, Speed range (rpm) 30-300.

WIGGENS cell culture roller rack Celrol Mini is highly flexible in facilitating its operation not only inside the incubator but also elsewhere on the work table. Remote control box can be attached to the incubator surface and flat cable needs no particular measures such as the access port. Its operation capacity is 2000ml bottle x 4ea at one time. The speed range is 2rpm to 30 rpm to help users utilize adherent cell culture performance.

Features
* Steel reinforced polyurethane timing belts
* Brushless DC Motor
* Powder coated aluminum for durability and cleanliness
* Non-slip rubber material for the best performance of rolling
* Designed for no idle roller by drive-belt